Videovox Pro LNS series Manual de usuario descargar pdf (Pagina 9)

1.2.7 Auto Touring

Add addresses into a routine in a desired order and then set time and stop

duration for each address. The dome will begin an auto touring between these

addresses. You can set 8 touring paths.

1.2.8 Auto Pattern

Memorize dome operation such as pan, tilt, and zoom to repeat. Focus and iris

are in auto mode during auto pattern. For each pattern, the time should be less

than 60 seconds. You can set 5 pattern paths.

1.2.9 Window Blanking

Window blanking is a user-defined, four-sided area that can not be viewed by

you. The blank area will move with pan and tilt functions and automatically adjust

in size as the lens zooms. You can set 8 blanking zones.

1.2.10 Action on Alarm

This series speed dome support three alarm modes. There are 7 alarm inputs

and 1 alarm output. Alarms can be individually programmed to initiated pattern,

or go to an associated preset, scanning, touring when received. Dome will return

to a previously programmed state after alarm acknowledgement or to its previous

position before alarm.

1.2.11 Auto Flip and IS (Camera support needed)

As long as you continue to hold the joystick in the down position, the dome

rotates 180 degrees and repositions itself for uninterrupted viewing of any

subjects that passes directly beneath the dome.

IS (Image stabilizer) allows you to get stable video.

1.2.12 Self-diagnosis

There is a self diagnosis procedure when dome boots up.

z Tilt and vertical engine check

z Camera diagnostics

z Display dome information and diagnosis information

1.2.13 Day/Night Mode

Auto/manual switches in low illumination.

z Auto: camera will automatically adjust CCD light level.

z Manual: use menu or function keys to select day/night mode.

1.2.14 Auto Focus

Auto focus allows the lens to remain in focus during zoom-in, zoom-out and

motion functions to get vivid image. You can use FAR or NEAR button to adjust

focus manually.

1.2.15 Backlight Compensation

Balance the brightest and darkest sections of a scene to produce a more vivid

picture.

1.2.16 Pan Tilt and Zoom

Supports zoom in and zoom out during tilt and pan movement.

In this period focus and iris are both in auto mode to get vivid image.

1.2.17 3D Location

Working with DVR, just click part of the current scene will be displayed in the

central window and automatically zooms. All of these allow you to trace precisely.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 60 61

Comentarios a estos manuales

Sin comentarios

Videovox Pro LNS series Manual de usuario Pagina 9

Comentarios a estos manuales

Relacionado con productos y manuales para Grabadores de vídeo digital (dvr) Videovox Pro LNS series