Videovox Pro LNS series Manual de usuario descargar pdf (Pagina 55)

Figure 50Preset operation

9.2 From DVR Menu to Dome Menu

In Figure 50 , input preset value 28 or 95 and click preset button. System pops up

dome menu please click page switch. You can see an image shown as below.

See

Figure 51.

Now you can use direction keys on the left as menu direction keys

(up/down/left/right). Icon near IRIS is confirm button.

You need to exit if you want to control PTZ movement again. Highlight exit key

and click confirm. Please refer to Chapter 6 Menu for more information.

Figure 51

9.3 Network Keyboard Operation for PELCO-P/D/P1/D1

9.3.1 Keyboard Setup

Before operation, you need to set the keyboard first. Form menu to control point

setup.

Here you can set ID, device name, device type and

connection type.

You can click ID button to enter current device

connection interface.

Highlight connection type and then click ENTER to set

RS 485.

485 address is 1 and select dome protocol as Pelco-P or

Pelco-D or Pelco-P1 or Pelco-D1.

Please refer to 8.4 Operation for more information.

9.3.2 Menu Operation

Confirm key

Menu direction key

ID：*0

Device name： ①

Device type：dome

Connection type：RS485

485 address：1

Parity：None

Protocol：PELCO-P/D/P1/D1

Stop bits:

Baud rate：9600

Data bits：8

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 61

Sin comentarios

Videovox Pro LNS series Manual de usuario Pagina 55