Videovox Pro LNS series Manual de usuario Pagina 59

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 61
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 58
SYSTEM INFORMATION
CAMERA PARAMETERS
ZFUNCTION SETTING
ALARM SETTING
DEVICE CONTROL
EXIT
PRESET
AUTO SCAN
ZTOURING
PATTERN
PRIVACY MASKING
BACK
EXIT
9.4.2.2 Tour setup
1. Tour setup
(1)In DVR PTZ control menu, call preset 28 or 95.
System pops up dome menu, and dome enters menu scan.
Click page switch button, system enters PTZ control page.
Up/down/left/right keys become menu direction keys,
icon near the IRIS becomes enter button. Move the
cursor down to highlight FUNCTION SETTING, then
click enter (icon near the IRIS). System now goes to
function setup menu
(2) In function setup menu, you can set preset, auto
scan, touring, pattern. Highlight AUTO SCAN and click
confirm button. The dome is ready for you to set pattern.
(3) Touring NO.:
Move cursor to highlight “TOURING NO.” and then use
left/right keys to adjust value. The value ranges from 001
to 008 seconds
DWELL
Move cursor to highlight “dwell” and then use direction
key s to adjust value. The value ranges from 003 to 255.
PRESET NO.
Move cursor to highlight “preset no” and use left/right
key to adjust value. The value ranges from 001 to 080.
ADD PRESET
Move cursor to highlight “add preset” and then click
confirm button (icon near IRIS.). Move cursor to
highlight “preset no” to modify preset value. Now you can
add the preset to proper touring NO, then move cursor
down to highlight add preset. Click confirm button to add
preset.
REMOVE PRESET
Move cursor to highlight “remove preset” to delete
current preset.
DELETE TOURING
Move cursor to highlight “delete touring” to delete all
presets in current tour.
Move cursor to highlight “run” (or “stop”) and click
confirm button (icon near IRIS) to begin (or stop)
scanning.
TOURING NO001
DWELL 005
PRESET NO 001
ADD PRESET
REMOVE PRESET
DELETE TOURING
RUN
STOP
BACK
EXIT
Vista de pagina 58
1 2 ... 54 55 56 57 58 59 60 61

Comentarios a estos manuales

Sin comentarios