Videovox Pro LNS series Manual de usuario descargar pdf (Pagina 39)

ALARM NO ：01

ACTION ：

NONE

CONTACT ：N/O

PRESET NO ：001

AUTOSCAN NO：001

TOURING NO ：001

RELAY OUT ：OFF

RESET DELAY ：3S

SAVE

BAC

• PRESET NO： Here is for you to set preset number. The value ranges

from 1 to 80. System goes to specified preset when idle status is on.

• AUTOSCAN NO： The value ranges from 1 to 5.

• TOURING： The value ranges from 1 to 8.

• PATTERN NO：The value ranges from 1 to 5.

• SAVE：Highlight and click confirm button to save current setup.

6.4.4 Alarm Setup

Figure 30 Alarm setup

Highlight ALARM SETTING button and click confirm button.

z ALARM NO: Here is to set alarm input. Alarm input value ranges from 1 to 7.

You can use left/right key to select.

z ACTION: Action on alarm function. It is including NONE/PRESET/AUTO

SCAN/TOURING functions. You can move joystick to select.

z CONTACT：There are two alarm signal mode: normal open (N/O) and

normal closed (N/C).

z PRESET NO：Please move joystick to set preset number. The camera will

turn to the preset to surveillance after alarm occurs.

z AUTO SCAN NO：Please move joystick to set preset number. The camera

will begin auto scan after alarm occurs.

z TOURING NO：Please move joystick to set touring number. The camera will

begin auto cruise when alarm occurs.

z RELAY OUT: Here is to set relay alarm mode and reset time. For example

OFF/5S means: relay alarm function is closed and the relay will reset in five

seconds after alarm occurs.

z RESET DELAY: here is for you to set alarm reset time. You can use left/right

key to select: 3 seconds, 10seconds, 30 seconds, 60 seconds or 120seconds.

The dome will go back to previous setup after alarm acknowledgement.

Please click save button after all the settings

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 60 61

Sin comentarios

Videovox Pro LNS series Manual de usuario Pagina 39