Videovox Pro LNS series Manual de usuario descargar pdf (Pagina 22)

Step 11 ——Cable connection

Please refer to chapter three cable connection.

Step 12 ——Tear off transparent cover.

Remove protection coating from transparent cover.

Note: Be careful. Do not dirty the dome cover.

5.2 In-ceiling Dome Installation

Step 1－Open a hole in the ceiling

Note:

The ceiling thickness should be within 0.8CM to 4.2CM.

In diameter 225MM section, it should support at least 20KG.

Step2－Set address, baud rate and protocol.

Remove the protect pads.

Note: reserve these pads for future use.

When you ship the dome back to the factory,

please insert these pads again.

Set address, baud rate and protocol.

Please refer to chapter two.

Locate the centre point

of the mounting

location and insert the

compass tool. Draw a

circle (dimension

about 225 ± 2mm)

Cut the circle

out of the

ceiling

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 60 61

Sin comentarios

Videovox Pro LNS series Manual de usuario Pagina 22