Videovox Pro LNS series Manual de usuario descargar pdf (Pagina 58)

PRESET

ZAUTO SCAN

TOURING

PATTERN

PRIVACY MASKING

BACK

EXIT

AUTO SCAN NO ： 001

SET LEFT LIMIT

SET RIGHT LIMIT

DEFAULT SPEED ：011

RUN

STOP

BACK

EXIT

1. Scan setup

(1) In DVR PTZ control menu, call preset.28 or 95.

System pops up dome menu, and dome enters menu

scanning. Click page switch button, system enters PTZ

control page. Up/down/left/right keys become menu

direction keys, the icon near the IRIS becomes enter

button. Move the cursor down to highlight “FUNCTION

SETTING”, then click confirm (Icon near the IRIS).

System now goes to function setup menu.

(2)In function setup menu, you can set preset, auto

scan, touring, pattern. Highlight AUTO SCAN and click

confirm button. The dome is ready for you to set pattern.

(3) Move cursor to highlight Auto Scan NO. and use

left/right keys in dome PTZ control interface to adjust

value. The value ranges from 001 to 005.

Move cursor to highlight “set left limit” and then

click confirm button (Icon near IRIS.). System pops

up OK to alert you that you have set left limit.

Move the cursor to highlight EXIT and click confirm

button (Icon near IRIS). Now the up/down/left/right

keys become PTZ control key. You can move dome to

another location.

(4) Repeat procedure 3 again to set right limit.

Move cursor to highlight “default speed”, now you

can use left and right key to adjust scan speed.

Move cursor to highlight run or stop and click

confirm button (Icon near IRIS) to begin or stop

scanning.

1 2 ... 53 54 55 56 57 58 59 60 61

Comentarios a estos manuales

Sin comentarios

Videovox Pro LNS series Manual de usuario Pagina 58

Comentarios a estos manuales

Relacionado con productos y manuales para Grabadores de vídeo digital (dvr) Videovox Pro LNS series