Videovox Pro LNS series Manual de usuario descargar pdf (Pagina 42)

5.6 Auto scan

Auto scan function allows camera to scan back and forth regularly in a horizontal

field. Here you need to set left and right limit and scan speed. System support five

scan route.

5-14

5.7 Auto pattern

This series network speed dome can memorize user PTZ manual operation, focus

zoom in/out, speed and etc. The dome begins moving from the start point to the end

point as pre-specified. One operation can last for maximum two minutes. Focus and

iris are in auto mode during auto pattern process.

5-15

Move PTZ to your start location and then click “left

limit” button in figure 5-14.

Move PTZ to your stop location and then click “right

limit” button in figure 5-14.

Now you have finished one scan setup.

In figure 5-12, click auto scan button, system begins

auto scan

rocess.

Select mode in PTZ movement options.

Click start button in figure 5-15, you can move

PTZ and implement camera operations.

After all the operations, click stop button in

figure 5-15. Now you have set one pattern.

In figure 5-12, click auto pattern button, system

begins auto pattern process.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 59 60

Sin comentarios

Videovox Pro LNS series Manual de usuario Pagina 42